|
| Roll Size | 3' x 125'
| 9' x 125'
| 10' x 125'
|
| Square Feet/Roll | 375 | 1,125 | 1,250 |
| Rolls/Pallet | 84
| 40 | 40
|
| Pallet Size | 48" x 96"
| 42" x 109"
| 42" x 120"
|
|
| Property | Test Method | RainDrop® 3D
|
Thickness1
(inches)
(mils) | ASTM D 1777 |
.020
20 |
Weight
(lbs./1,000 ft.²) | ASTM D 3776 | 21 |
Tensile Strength
(lbs./in.,MD/TD)2 | ASTM D 882 | 56/30
|
Trapezoid Tearing Strength
(lbs., MD/TD)2 | ASTM D 4533 | 25/41
|
Burst Strength
(psi) | ASTM D 751 | 155
|
Water Resistance
(minutes) | ASTM D 779
| >120 |
| Water Penetration Resistance (CM H2O) | AATCC-127 | >500 |
Drainage Efficiency3
(% Water Drained) | ASTM E 2273 | >90 |
Water Vapor Permeance
(perms) | ASTM E 96
Desiccant Method | 16
|
Water Vapor Transmission Rate
(g/m²/24 hrs.) | ASTM E 96
Desiccant Method | 128
|
Air Permeance (L/s/m2 @ 75 Pa)
(cfm/ft2 @ 1.57 psf)
| ASTM E 2178 | 0.001
0.000
|
Air Resistance/Wall Assembly
(L/s/m2@ 75 Pa)
(cfm/ft2 @ 1.57 psf | ASTM E 2357 |
<.0.01
0.00 |
Air Penetration Resistance
(seconds per 100 cc) | TAPPI T-460 | >800 |
Air Leakage Rate/Air Resistance
(cfm/ft²@ 1.57 psf/25 mph) | ASTM E 283 | 0.01
|
Structural Integrity
(minimum 1 hr. @ 500 Pa/65 mph) | ASTM E 330
Procedure A | Pass
|
Water Resistance
(15 min.@ 27 Pa/15 mph) | ASTM E 331 | Pass
|
Fire Characteristics4
Flame Spread
Smoke Developed | ASTM E 84 | Class A
0
15 |
Low Point (.010 inches/10 mils), High Point (.020 inches/20 mils).
2 Machine Direction/Cross Direction.
3 Drainage testing was conducted in accordance with ASTM E 2273-03 using a cementitious base coat as required for EIFS and adhered veneers. The GreenGuard
® RainDrop
® was installed directly over the sheathing and the exterior side of the RainDrop
® was covered with a layer of Grade D water-resistive barrier/building paper as required in the International Residential Code for stucco wall assemblies.
4 These numerical flame spread and smoke ratings are not intended to reflect hazards presented by this material under actual fire conditions.